 |
|
|
|
MITSUBISHI FX2N-8EYT Transistor output module
|
Product Details:
|
Detailed Product Description
MITSUBISHI FX2N-8EYT Manual And Instructions
FX2N-8EYT datasheetPDF datasheet
MITSUBISHI FX2N-8EYT Product information and technical parameters:
Brand: MITSUBISHI
Name: Transistor output module
Model: FX2N-8EYT
Total input and output points: 8 points.
Output points: 8 points.
Output type: transistor output.
FX Series in the compact body built in superior performance, and strive to operate simple.
In addition, rich options can meet the various needs of customers.
In the virtual factory will be rich in the function of a part of the introduction.
It is easy to control the analog quantity of the application.
Can be extended to all models in the FX series analog devices.
Function extension board, special adapter without programming can be used for communication.
FX2N extension module.
The expansion module is an input and output expansion device of the power supply from the basic unit or the expansion unit,
Can choose the relay or crystal output models, to 8 points for the unit to connect.
Can be extended to FX3GA/FX3G, FX3GE, FX3GC, as well as FX3U, FX3UC series,
When connecting to FX3UC or FX3GC, you need FX2NC-CNV-IF or FX3UC-1PS-5V.
The number of connection points depends on the basic unit and the expansion unit.
Input and output points: 30 points.
Power supply: AC100-240V.
Input points: 16 points.
Output points: 14 points.
Output form: transistor output (drain).
Power consumption: 21W.
Weight: 0.45KG.
Outline dimension: 100x90x75mm.
A new application model.
FX3SA is a basic model on the basis of the basic performance of FX1S above the expansion of the expansion of the new model FX2N-8EYT.
FX3SA is applicable to all kinds of fields of small scale equipment which need to simulate the quantity and function of MODBUS and Ethernet FX2N-8EYT
Basic models suitable for small scale control.
Compact but powerful,
At the same time, the analog quantity and communication function, etc.. Input and output points: 30 points.
Power supply: AC100-240V FX2N-8EYT.
Input points: 16 points.
Output points: 14 points.
Output form: relay output.
Power consumption: 21W.
Weight: 0.45KG.
Outline dimension: 100x90x75mm.
A new application model.
FX3SA is a basic model on the basis of the basic performance of FX1S above the expansion of the expansion of the new model.
FX3SA is applicable to all kinds of fields of small scale equipment which need to simulate the quantity and function of MODBUS and Ethernet FX2N-8EYT.
Basic models suitable for small scale control.
Compact but powerful,
At the same time, the analog quantity and communication function, etc.. Max input / output points: 32 points.
Supply voltage: 100 - 240VAC.
Input points: 16 points.
Output points: 16 points.
Output type: transistor.
Power consumption: 40VA.
Weight (kg):0.65.
Size (WxHxD) mm:150x90x87.
Note recording function, Component annotation can be recorded in the program register.
Online program editor, online change the program will not lose the working hours or stop production operation.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password prrotection, using a eight digit password to protect your program FX2N-8EYT.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application off the continuous scan time FX2N-8EYT.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Contact Details
Other Products
-
MITSUBISHI FX2N-48ER-UA1/UL Relay output unit
-
MITSUBISHI FX2N-48ET-D Transistor output unit
-
MITSUBISHI FX2N-48ET Transistor output unit
-
MITSUBISHI FX2N-8EYT-H Transistor output module
-
Original MITSUBISHI FX2N-32ET Transistor output unit,FX2N module
-
Original Mitsubishi Original mitsubishi inverter FR-E740-0.4K-CHT 0.75K 1.5K 2.2K 3.7K 5.5K 7.5